AOSHIKE 10Pcs 2V 130mA Micro Solar Panels Photovoltaic Solar Cells with Wires Solars Epoxy Plate DIY Projects Toys 54mm x 54mm/2.13″ x 2.13″


Product Description

STC standards need to meet the following conditions:

Atmospheric pressure 101kPaSolar irradiance 1000W/m²Module temperature 25℃Air quality AM1.5

10Pcs 3V 120mA Solar Cells for Battery Charger DIY 54mm x 54mm/2.13″ x 2.13″

Working voltage 2V Max current 130mA Overall dimensions 54mm x 54mm/2.13″ x 2.13″ Package Dimensions 4.8″ x 3.82″ x 2.13″ Material Epoxy Resin AB, PCB or fiberglass backplane Output interface Positive and Negative solder joint at a glance Note The solar panel / cell parameters are measured under the standard test conditions(temperature 25 degrees, AM1.5, 1000w /㎡) Applicable to the general environment, waterproof, oil, strong acid and alkali resistance, compression and corrosion resistance. Packing list 10Pcs 2V 130mA Solar Cells

About the product:

Scope of application:

For solar lawn lamp, solar wall lamp, solar handicraft, solar toys, solar radio, solar flashlight, solar cell phone charger

solar water pump,garden lights, street lamps, traffic lights, Navigation lights, traffic lights, satellite navigation power

solar radio power panels, solar MP4 power panels,solar home / office power and portable mobile power system.

On the use and testing:

The product can only be used in the sun, the nominal power is noon sun peak, morning and evening sun and not strong sunlight is not up to the nominal.Which the buyer attention! And in the light Inside the room, the solar panel is almost impossible to detect what value.This is the ordinary light and the sun light caused by very different! So be sure to test under the great sun.


System 1

System 2

System 3

Max power
0.15W 0.3W 0.32W 0.3W 0.3W 0.36W
Max current
30mA 50mA 160mA 60mA 60mA 120mA
Average voltage
5V 6V 2V 5V 5V 3V
53mmx30mm/2″x1.96″ 80mmx45mm/3.14″x1.77″ 68mmx37mm/2.67″x1.45″ 68mmx37mm/2.67″x1.45″ 60mmx55mm/2.36″x2.16″
Whether with line

❶【Accurate power】The laboratory measured 2V 130mA, the actual parameters will also fluctuate slightly above and below this value.
❷【Product Parameter】10Pcs Polycrystalline solar panels; Power: 2V 130mA; Size: 54mm x 54mm/2.13″ x 2.13″. Excellent low light effect,This is perfect for the experience solderer.
❸【Experience the fun of DIY】 Build your DIY powered models/solar toys / solar displays/Solar Powered String Lights.
❹【High Conversion EffIciency】 Constructed of high-efficiency solar arrays,convert up to 21.5-23.5% of solar power into free energy.
❺【Wide range of applications】Solar yard lighting; Small household lighting systems; Solar street lighting; Outdoor solar advertising;Suitable for all kinds of low-power electrical appliances, emergency lights Yeah, advertising lights, traffic lights, household lights, electric fans, such as solar wat.


Based on 0 reviews

0.0 overall

Be the first to review “AOSHIKE 10Pcs 2V 130mA Micro Solar Panels Photovoltaic Solar Cells with Wires Solars Epoxy Plate DIY Projects Toys 54mm x 54mm/2.13″ x 2.13″”

لا يوجد تقييمات سابقة

تغيير العملة